Drip Irrigation Kits

We offer drip irrigation kits for small, intensive plots through to smallholder and community plots. Ground stakes fasten down the hoses so that our kits can be used in greenhouses, polytunnels and open land.


30 Emitter Drip Kit
30 Emitter Extension Kit
300 Emitter Drip Kit
200 Emitter Extension Kit

Large Drip Irrigation Kits

30 Emitter Kit

30 Emitter Drip Kit

Approximate irrigated area = 10 square metres - We provide a 40m coil which is sufficient for this area Ideal for a greenhouse, poly-tunnel, or open ground ------- Up to 10 year serviceable life

The 30 Emitter Drip Kit provides the components (excluding tank or water butt) required to irrigate a small greenhouse plot.

It allows for roughly 30 plants to be grown within your garden space, greenhouse, or poly-tunnel.

This drip kit is based around our unique Uni-Tank Connector, our unique SqueezeMe™ Emitter, and 5mm through-bore system of hoses and fittings. Ours are the only systems of their kind in the world with features that mean that you can irrigate plants using gravity and away from a mains fed water source - ideal for a standalone plot of land.

The following items are supplied as standard in the 30 Emitter Drip Kit:

Product Code Item Quantity
TFI-I-30 Installation Guide 1
0502 Straight Connector (5mm) 36
0504 Tee (5mm) 30
0516 Black Lateral Hose 40m
0509 Ground Stake (5mm) 32
0514 Slide Valve (5mm) 4
0540 SqueezeMe2™ Emitter 32
0541 Uni Tank Connection Kit (in three parts) 4

The quantities are designed to suit popular sizes of drip irrigation layout. PLEASE NOTE: we have included some extra parts to provide you with increased flexibility. You may wish to use a few emitters on a particularly thirsty plant, or use the extra emitters to irrigate 32 plants. You may also be able to increase the number of plants irrigated by this kit by centering an emitter between up to four plants - this would enable you to irrigate approximately 120 additional plants with this drip kit.

If you would like to order some more items to increase the size of your layout, please email us directly.

PLEASE NOTE: The packaged 30 Emitter Drip Kit weighs just under 1.6kg.

PLEASE NOTE: This kit works with a tank or water butt which should be elevated. We recommend elevating the tank somewhere between 0.2 and 1 metre.

*** The system should be drained in the winter months to protect from freezing ***


30 Emitter Extension Kit

30 Emitter Extension Kit

Approximate irrigated area = additional 8 square metres - We provide a 40m coil which is sufficient for this area Ideal for a greenhouse, poly-tunnel, or open ground ------- Up to 10 year serviceable life
Use the 30 Emitter Extension Kit with the 30 Emitter Drip Kit

The 30 Emitter Extension Kit provides the components (excluding tank or water butt) required to extend your 30 Emitter Drip Kit to irrigate approximately 60 plants.

It allows for roughly 30 additional plants to be grown within your garden space, greenhouse, or poly-tunnel.

This drip kit is based around our unique Uni Tank Connector, our unique SqueezeMe™ Emitter, and 5mm through-bore system of hoses and fittings. Please note that a Uni Tank Connector Kit is not included in this 30 Emitter Extension Kit as they are all included in the 30 Emitter Drip Kit. Ours are the only systems of their kind in the world with features that mean that you can irrigate plants using gravity and away from a mains fed water source - ideal for a standalone plot of land.

The following items are supplied as standard in the 30 Emitter Extension Kit:

Product Code Item Quantity
TFI-I-30E Installation Guide 1
0502 Straight Connector (5mm) 44
0504 Tee (5mm) 34
0516 Black Lateral Hose 40m
0509 Ground Stake (5mm) 32
0514 Slide Valve (5mm) 2
0540 SqueezeMe2™ Emitter 32

The quantities are designed to suit popular sizes of drip irrigation layout. PLEASE NOTE: we have included some extra parts to provide you with increased flexibility. You may wish to use a few emitters on a particularly thirsty plant, or use the extra emitters to irrigate 32 plants. You may also be able to increase the number of plants irrigated by this kit by centering an emitter between up to four plants - this would enable you to irrigate approximately 120 additional plants with this extension kit.

If you would like to order some more items to increase the size of your layout, please email us directly.

PLEASE NOTE: The packaged 30 Plant Extension Kit weighs just over 1.5kg.

PLEASE NOTE: This kit works with a tank or water butt which should be elevated. We recommend elevating the tank somewhere between 0.2 and 1 metre.

*** The system should be drained in the winter months to protect from freezing ***


300 Emitter Kit

300 Emitter Drip Kit

Approximate irrigated area = 83 square metres - We provide 148m of hose which is sufficient for this area Ideal for a large greenhouse, poly-tunnel, or open ground ------- Up to 10 year serviceable life

The 300 Emitter Drip Kit provides the components (excluding tank or water butt) required to irrigate a large plot with approximately 300 plants in it.

It allows for roughly 300 plants to be grown, usually inside a greenhouse or poly-tunnel, or on an allotment.

This drip kit range is based on our unique Four Way Tank Connector, our unique SqueezeMe2 Emitter, and combination of 13mm and 5mm through-bore system of hoses and fittings. Ours are the only systems of their kind in the world with features that mean that you can irrigate trees, shrubs, and vines using gravity and away from a mains fed water source - ideal for a standalone plot of land.

The following items are supplied as standard in the 300 Plant Drip Kit:

Product Code Item Quantity
TFI-I-300 Installation Guide 1
0502 Straight Connector (5mm) 303
0540 SqueezeMe2™ Emitter 303
1301 Four Way Tank Connector 1
1302 Straight Connector (13mm) 8
1303 Elbow Connector (13mm) 12
1304 Tee Connector (13mm) 32
1306 Black Distribution Hose (plain) 52m
1315 Black Row Hose (pre-punched with 300m spacing) 96m
1309 Ground Stake (13mm) 40
1314 Slide Valve (13mm) 6
1317 End Loop 6

The quantities are designed to suit popular sizes of drip irrigation layout, and this kit is based on a 'button emitter' layout. PLEASE NOTE: we have included some extra parts to provide you with increased flexibility. You may wish to use a few emitters on a particularly thirsty plant, or use the extra emitters to irrigate 303 plants.

If you would like to order some more items to increase the size of your layout, please email us directly.

PLEASE NOTE: The packaged 300 Emitter Drip Kit weighs just over 15kg.

PLEASE NOTE: This kit works with a tank or water butt which should be elevated. We recommend elevating the tank somewhere around 1 metre.

*** The system should be drained in the winter months to protect from freezing ***


200 Emitter Extension Kit

200 Emitter Extension Kit

Approximate irrigated area = additional 42 square metres - We provide 90m of hose which is sufficient for this area Ideal for a large greenhouse, poly-tunnel, or open ground ------- Up to 10 year serviceable life
Use the 200 Emitter Extension Kit with the 300 Emitter Drip Kit

The 200 Emitter Extension Kit provides the components (excluding tank or water butt) required to extend your 300 Plant Drip Kit to irrigate approximately 500 plants.

It allows for more than 200 additional plants to be grown, usually inside a greenhouse or poly-tunnel, or on an allotment.

This drip kit range is based on our unique Four Way Tank Connector, our unique SqueezeMe2 Emitter, and combination of 13mm and 5mm through-bore system of hoses and fittings. Please note that a Four Way Tank Connector is not included in the 200 Plant Extension Kit as there is one included in the 300 Plant Drip Kit. Ours are the only systems of their kind in the world with features that mean that you can irrigate trees, shrubs, and vines using gravity and away from a mains fed water source - ideal for a standalone plot of land.

The following items are supplied as standard in the 200 Emitter Extension Kit:

Product Code Item Quantity
TFI-I-200E Installation Guide 1
0502 Straight Connector (5mm) 217
0540 SqueezeMe2™ Emitter 217
1301 Four Way Tank Connector 0
1302 Straight Connector (13mm) 4
1303 Elbow Connector (13mm) 0
1304 Tee Connector (13mm) 20
1306 Black Distribution Hose (plain) 26m
1315 Black Row Hose (pre-punched with 300m spacing) 64m
1309 Ground Stake (13mm) 20
1314 Slide Valve (13mm) 2
1317 End Loop 2

The quantities are designed to suit popular sizes of drip irrigation layout, and this kit is based on a 'button emitter' layout. PLEASE NOTE: we have included some extra parts to provide you with increased flexibility. You may wish to use a few emitters on a particularly thirsty plant, or use the extra emitters to irrigate an additional 217 plants.

If you would like to order some more items to increase the size of your layout, please email us directly.

PLEASE NOTE: The packaged 200 Plant Extension Kit weighs just over 9kg.

PLEASE NOTE: This kit works with a tank or water butt which should be elevated. We recommend elevating the tank somewhere around 1 metre.

*** The system should be drained in the winter months to protect from freezing ***


Large Drip Kits with Water Ring Main from Tank

3,710 Emitter Drip Kit

3,710 Emitter Drip Kit 1/4acre - 45cm Spacing

Approximate irrigated area = 1/4 Acre.

The 3,710 Emitter Drip Kit provides the components (excluding tank or water butt) required to irrigate a field approximately 1/4 acre in size – for larger plots of land see our 7,500 Emitter Drip Kit to cover ½ Acre.

This drip kit allows for 3,710 plants to grow at a spacing of 45cm – for more intensive cultivation more than one plant can be planted around each emitter – raising the prospective crop yield.

Our drip kits are designed to work with water from any source – using our patented SqueezeMe2 Emitter. This makes our large drip kits ideal for smallholders and farmers where pristine clean water or costly filtration is not an option.

NOTE: This drip kit includes the required Water Ring Main and Stand Pipe assemblies.

The following items are supplied as standard in the 3,710 Emitter Drip Kit:

Product Code Item Quantity
0502 Straight Connector (5mm bore) 3,750
0512 Adjusting Ring for 0513 3,750
0513 SqueezeMe2 Emitter body 3,750
1302 Straight Connector (13mm) 36
1303 Elbow (13mm bore) 36
1304 Tee (13mm bore) 350
1306 Black Distribution Hose 33m coil (13mm bore) 11 coils
1309 Ground Stake (13mm) 300
1314 Slide Valve (13mm) 20
1340 Black Row Hose 31.5m coil (13mm bore) 45cm Hole Pitch 53 coils
1317 End Loop (colour yellow) 20
LLK-I-3710 rev01-2017 Kit Installation Guide 1
LLK-SUP-SQU2 rev01-2016 Product Overview SqueezeMe2 2
LLK-SUP-FLOW rev01-2016 Supplementary Info – Positioning 2

The following items are supplied as standard in the Water Ring Main with Stand Pipes:

Product Code Item Quantity
1301 Four Way Tank Connector (incl. brush) 4
1334 Foam Washer 60 OD x 38 bore x 6mm thick 1
1351 Custom Reducing Bush 1 ½ BSP M x 1 1/8 BSP F 4
1352 Reducing Socket/Nipple 1 ½ BSP F x 1 ¼ BSP M 4
1353 Elbow 1 ¼ BSP female / female 4
1354 Nipple 1 ¼ BSP male / male 4
1355 Ball Valve 1 ¼ BSP female / female 5
1356 MDPE Male Adapter 32mm x 1 ¼ BSP Male 6
1357 MDPE Elbow 32mm x 32mm compression fitting 5
1358 PTFE Tape @ 3 metres of tape per stand pipe assy. 13.5m
1359 Silicone Cap to close off sight tube spigot on FWTC 5
1360 MDPE Pipe 32mm @ 275 gm / metre – estimated 94m
1373 MDPE Elbow 90° Male threaded 32mm x 1 ¼ BSP M 1
1374 MDPE Tee 32mm compression fitting 3
1375 PM PP Tank Inlet Thread (tank connector) 1 ¼ BSP 1
1361 M6 x 20 mm Brass Set Screw 4
5,671 Emitter Drip Kit

5,671 Emitter Drip Kit 1/4acre - 30cm Spacing

Approximate irrigated area = 1/4 Acre.

The 5,671 Emitter Drip Kit provides the components (excluding tank or water butt) required to irrigate a field approximately 1/4 acre in size – for larger plots of land see our 7,500 Emitter Drip Kit to cover ½ Acre.

This drip kit allows for 5,671 plants to grow at a spacing of 30cm – for more intensive cultivation more than one plant can be planted around each emitter – raising the prospective crop yield.

Our drip kits are designed to work with water from any source – using our patented SqueezeMe2 Emitter. This makes our large drip kits ideal for smallholders and farmers where pristine clean water or costly filtration is not an option.

NOTE: This drip kit includes the required Water Ring Main and Stand Pipe assemblies.

The following items are supplied as standard in the 5,671 Emitter Drip Kit:

Product Code Item Quantity
0502 Straight Connector (5mm bore) 5,700
0512 Adjusting Ring for 0513 5,700
0513 SqueezeMe2 Emitter body 5,700
1302 Straight Connector (13mm) 36
1303 Elbow (13mm bore) 36
1304 Tee (13mm bore) 350
1306 Black Distribution Hose 33m coil (13mm bore) 11 coils
1309 Ground Stake (13mm) 300
1314 Slide Valve (13mm) 20
1314 Slide Valve (13mm) 20
1340 Black Row Hose 31.5m coil (13mm bore) 45cm Hole Pitch 53 coils
1317 End Loop (colour yellow) 20
LLK-I-3710 rev01-2017 Kit Installation Guide 1
LLK-SUP-SQU2 rev01-2016 Product Overview SqueezeMe2 2
LLK-SUP-FLOW rev01-2016 Supplementary Info – Positioning 2

The following items are supplied as standard in the Water Ring Main with Stand Pipes:

Product Code Item Quantity
1301 Four Way Tank Connector (incl. brush) 4
1334 Foam Washer 60 OD x 38 bore x 6mm thick 1
1351 Custom Reducing Bush 1 ½ BSP M x 1 1/8 BSP F 4
1352 Reducing Socket/Nipple 1 ½ BSP F x 1 ¼ BSP M 4
1353 Elbow 1 ¼ BSP female / female 4
1354 Nipple 1 ¼ BSP male / male 4
1355 Ball Valve 1 ¼ BSP female / female 5
1356 MDPE Male Adapter 32mm x 1 ¼ BSP Male 6
1357 MDPE Elbow 32mm x 32mm compression fitting 5
1358 PTFE Tape @ 3 metres of tape per stand pipe assy. 13.5m
1359 Silicone Cap to close off sight tube spigot on FWTC 5
1360 MDPE Pipe 32mm @ 275 gm / metre – estimated 94m
1373 MDPE Elbow 90° Male threaded 32mm x 1 ¼ BSP M 1
1374 MDPE Tee 32mm compression fitting 3
1375 PM PP Tank Inlet Thread (tank connector) 1 ¼ BSP 1
1361 M6 x 20 mm Brass Set Screw 4